MICROSOFT OFFICIAL: New Updated 70-411 Exam Questions from Braindump2go 70-411 PDF Dumps and 70-411 VCE Dumps! Welcome to Download the Newest Braindump2go 70-411 VCE&PDF Dumps:  http://www.braindump2go.com/70-411.html (322 Q&As)

2015 Timesaving Comprehensive Guides For Microsoft 70-411 Exam: Using Latst Released Braindump2go 70-411 Practice Tests Questions, Quickly Pass 70-411 Exam 100%! Following Questions and Answers are all the New Published By Microsoft Official Exam Center!

Exam Code: 70-411
Exam Name Administering Windows Server 2012
Certification Provider: Microsoft
Corresponding Certifications: MCSA, MCSA: Windows Server 2012, MCSE, MCSE: Desktop Infrastructure, MCSE: Private Cloud, MCSE: Server Infrastructure

Keywords:70-411 Dumps,70-411 Microsoft Exam Questions,70-411 VCE,70-411 PDF,70-411 Practice Exams,70-411 Practice Tests,70-411 Book,70-411 Study Guide

QUESTION 261
You wants to change the memory of a virtual machine that is currently powered up.
What does he need to do?

A.    Shut down the virtual machine, use the virtual machine’s settings to change the memory, and start it again.
B.    Use the virtual machine’s settings to change the memory
C.    Pause the virtual machine, use the virtual machine’s settings to change the memory, and resume it.
D.    Save the virtual machine, use the virtual machine’s settings to change the memory, and resume it.

Answer: A

QUESTION 262
You need to stop an application from running in Task Manager.
Which tab would you use to stop an application from running?

A.    Performance
B.    Users
C.    Options
D.    Details

Answer: D

QUESTION 263
You upgraded all of your locations to Windows Server 2012 R2 and implemented the routing capability built into the servers.
You chose to implement RIP. After implementing the routers, you discover that routes that you don’t want your network to consider are updating your RIP routing tables.
What can you do to control which networks the RIP routing protocol will communicate with on your network?

A.    Configure TCP/IP filtering
B.    Configure RIP route filtering
C.    Configure IP packet filtering
D.    Configure RIP peer filtering
E.    There is no way to control this behavior

Answer: B
Explanation:
RIP route filters allow you to configure your routers to either ignore or accept updates from specific network addresses or a range of addresses. TCP/IP filtering is configured at each individual host to control the traffic at a granular level, such as a specific address, UDP port, or TCP port. IP packet filtering is used on the router interface to control IP traffic based on subnet masks, IP address, or port.
RIP peer filtering is used to control communication between individual routers rather than control the entire network address.

QUESTION 264
Your company has offices in five locations around the country. Most of the users’ activity is local to their own network. Occasionally, some of the users in one location need to send confidential information to one of the other four locations or to retrieve information from one of them. The communication between the remote locations is sporadic and relatively infrequent, so you have configured RRAS to use demand-dial lines to set up the connections. Management’s only requirement is that any communication between the office locations be appropriately secured. Which of the following steps should you take to ensure compliance with this requirement? (Choose all that apply.)

A.    Configure CHAP on all the RRAS servers.
B.    Configure PAP on all the RRAS servers.
C.    Configure MPPE on all the RRAS servers.
D.    Configure L2TP on all the RRAS servers.
E.    Configure MS-CHAPv2 on all the RRAS servers.

Answer: CE
Explanation:
http://technet.microsoft.com/en-us/library/cc780018%28v=ws.10%29.aspx
Dial-up connection is necessary so recommended User Authentication Protocol is MS- CHAP v2 and encryption method is MPPE.

QUESTION 265
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
In a remote site, a support technician installs a server named DC10 that runs Windows Server 2012 R2. DC10 is currently a member of a workgroup.
You plan to promote DC10 to a read-only domain controller (RODC).
You need to ensure that a user named Contoso\User1 can promote DC10 to a RODC in the contoso.com domain. The solution must minimize the number of permissions assigned to User1.
What should you do?

A.    From Dsmgmt, run the local roles command.
B.    From Active Directory Administrative Center, modify the security settings of the Domain Controllers
organizational unit (OU).
C.    From Active Directory Users and Computers, run the Delegation of Control Wizard on the contoso.com
domain object.
D.    From Active Directory Users and Computers, pre-create an RODC computer account.

Answer: D
Explanation:
A staged read only domain controller (RODC) installation works in two discrete phases:
1.Staging an unoccupied computer account
2.Attaching an RODC to that account during promotion

QUESTION 266
Which of the following features is available when Windows Server 2012 R2 is installed using the GUI option but without the desktop experience feature installed?

A.    Metro-style Start screen
B.    Built-in help system
C.    All of these
D.    Windows Media Player

Answer: AB
Explanation:
Here is description of Desktop Experience:
http://technet.microsoft.com/en-us/library/cc772567.aspx

QUESTION 267
Your network contains two servers named Server1 and Server 2. Both servers run Windows Server 2012 R2 and have the DNS Server server role installed.
On Server1, you create a standard primary zone named contoso.com.
You plan to create a standard primary zone for ad.contoso.com on Server2.
You need to ensure that Server1 forwards all queries for ad.contoso.com to Server2.
What should you do from Server1?

A.    Create a trust anchor named Server2.
B.    Create a conditional forward that points to Server2
C.    Create a zone delegation that points to Server2.
D.    Add Server2 as a name server.

Answer: C
Explanation:
You can divide your Domain Name System (DNS) namespace into one or more zones.
You can delegate management of part of your namespace to another location or department in your organization by delegating the management of the corresponding zone.
For more information, see Understanding Zone Delegation

QUESTION 268
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2.
On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1.
What should you do?

A.    On Server1, create a source computer initiated subscription.
From a Group Policy object (GPO), configure the Configure forwarder resource usage setting
B.    On Server1, create a source computer initiated subscription.
From a Group Policy object (GPO), configure the Configure target Subscription Manager setting
C.    On Server1, create a collector initiated subscription.
From a Group Policy object (GPO), configure the Configure target Subscription Manager setting
D.    On Server1, create a collector initiated subscription.
From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.

Answer: B
Explanation:
Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer. This differs from a collector initiated subscription because in the collector initiated subscription model, the event collector must define all the event sources in the event subscription.
1. Run the following command from an elevated privilege command prompt on the
Windows Server domain controller to configure Windows Remote Management:
winrm qc – q
2. Start group policy by running the following command:
%SYSTEMROOT%\System32\gpedit. msc
3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the Event Forwarding node.
4. Right-click the SubscriptionManager setting, and select Properties. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The SubscriptionManager Properties window contains an Explain tab that describes the syntax for the setting.
5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied: gpupdate /force.
If you want to configure a source computer-initiated subscription, you need to configure the following group policies on the computers that will act as the event forwarders:
* (A) Configure Target Subscription Manager This policy enables you to set the location of the collector computer.

QUESTION 269
You have a DNS server named DN51 that runs Windows Server 2012 R2.
On DNS1, you create a standard primary DNS zone named adatum.com.
You need to change the frequency that secondary name servers will replicate the zone from DNS1.
Which type of DNS record should you modify?

A.    start of authority (SOA)
B.    name server (NS)
C.    service location (SRV)
D.    host information (HINFO)

Answer: A
Explanation:
The time to live is specified in the Start of Authority (SOA) record
Note: TTL (time to live) – The number of seconds a domain name is cached locally before expiration and return to authoritative nameservers for updated information.

QUESTION 270
In Windows Server 2012 R2, you can remove the Server Graphical Shell, resulting in the “Minimal Server Interface.” This is similar to a Server with a GUI installation except that some features are not installed.
Which of the following features is not installed in this scenario?

A.    MMC
B.    Windows Explorer
C.    Control Panel (subset)
D.    Server Manager

Answer: B
Explanation:
When you choose the minimal server interface option Internet Explorer 10, Windows Explorer, the desktop, and the Start screen are not installed. Microsoft Management Console (MMC), Server Manager, and a subset of Control Panel are still present.


Braindump2go 70-411 Latest Updaed Braindumps Including All New Added 70-411 Exam Questions from Exam Center which Guarantees You Can 100% Success 70-411 Exam in Your First Try Exam!

1_thumb4_thumb_thumb_thumb_thumb_thumb_thumb

FREE DOWNLOAD: NEW UPDATED 70-411 PDF Dumps & VCE Dumps from Braindump2go: http://www.braindump2go.com/70-411.html  (322 Q&As)