156-315.80 Exam Dumps, 156-315.80 Exam Questions, 156-315.80 PDF Dumps, 156-315.80 VCE Dumps, Check Point Exam

[2020-Apr-New]Braindump2go 156-315.80 PDF and 156-315.80 VCE Dumps Free Share[421-440]

Apr/2020 New Braindump2go 156-315.80 Exam Dumps with PDF and VCE Free Updated Today! Followng are some new 156-315.80 Exam Questions!

QUESTION 421
By default how often updates are checked when the CPUSE Software Updates Policy is set to Automatic?

A. Six times per day
B. Seven times per day
C. Every two hours
D. Every three hours

Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_AdminWebAdminGuide/html_frameset.htm?topic=documents/R77/CP_R77_Gaia_AdminWebAdminGuide/112109

QUESTION 422
In terms of Order Rule Enforcement, when a packet arrives at the gateway, the gateway checks it against the rules in the top Policy Layer, sequentially from top to bottom. Which of the following statements is correct?

A. If the Action of the matching rule is Accept, the gateway will drop the packet.
B. If the Action of the matching rule is Drop, the gateway continues to check rules in the next Policy Layer down.
C. If the Action of the matching rule is Drop, the gateway stops matching against later rules in the Policy Rule Base and drops the packet.
D. If the rule does not matched in the Network policy it will continue to other enabled policies

Answer: C
Explanation:
https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/R80/CP_R80_SecMGMT/126197

QUESTION 423
The back end database for Check Point R80 Management uses:

A. DBMS
B. MongoDB
C. PostgreSQL
D. MySQL

Answer: C

QUESTION 424
UserCheck objects in the Application Control and URL Filtering rules allow the gateway to communicate with the users. Which action is not supported in UserCheck objects?

A. Ask
B. Drop
C. Inform
D. Reject

Answer: D

QUESTION 425
Choose the correct syntax to add a new host named “emailserver1” with IP address 10.50.23.90 using GAiA Management CLI?

A. mgmt_cli add host name “myHost12 ip” address 10.50.23.90
B. mgmt_cli add host name ip-address 10.50.23.90
C. mgmt_cli add host “emailserver1” address 10.50.23.90
D. mgmt_cli add host name “emailserver1” ip-address 10.50.23.90

Answer: D
Explanation:
https://weekly-geekly.github.io/articles/339924/index.html

QUESTION 426
Within the Check Point Firewall Kernel resides Chain Modules, which are individually responsible for the inspection of a specific blade or feature that has been enabled in the configuration of the gateway. For Wire mode configuration, chain modules marked with _______ will not apply.

A. ffffffff
B. 00000001
C. 00000002
D. 00000003

Answer: B

QUESTION 427
SmartConsole R80.x requires the following ports to be open for SmartEvent:

A. 19009, 19090 & 443
B. 19009, 19004 & 18190
C. 18190 & 443
D. 19009, 18190 & 443

Answer: D

QUESTION 428
In Advanced Permanent Tunnel Configuration, to set the amount of time the tunnel test runs without a response before the peer host is declared `down’, you would set the_________?

A. life sign polling interval
B. life sign timeout
C. life_sign_polling_interval
D. life_sign_timeout

Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R77/CP_R77_VPN_AdminGuide/html_frameset.htm?topic=documents/R77/CP_R77_VPN_AdminGuide/14018

QUESTION 429
Which is the correct order of a log flow processed by SmartEvent components?

A. Firewall > Correlation Unit > Log Server > SmartEvent Server Database > SmartEvent Client
B. Firewall > SmartEvent Server Database > Correlation Unit > Log Server > SmartEvent Client
C. Firewall > Log Server > SmartEvent Server Database > Correlation Unit > SmartEvent Client
D. Firewall > Log Server > Correlation Unit > SmartEvent Server Database > SmartEvent Client

Answer: D

QUESTION 430
CoreXL is NOT supported when one of the following features is enabled: (Choose three)

A. Route-based VPN
B. IPS
C. IPv6
D. Overlapping NAT

Answer: ACD
Explanation:
CoreXL does not support Check Point Suite with these features:
Check Point QoS (Quality of Service)
Route-based VPN
IPv6 on IPSO
Overlapping NATExplanation:
https://sc1.checkpoint.com/documents/R76/
CP_R76_PerformanceTuning_WebAdmin/6731.htm

QUESTION 431
Which Check Point daemon invokes and monitors critical processes and attempts to restart them if they fail?

A. fwm
B. cpd
C. cpwd
D. cpm

Answer: C
Explanation:
https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_CLI_ReferenceGuide/html_frameset.htm?topic=documents/R80.30/WebAdminGuides/EN/CP_R80.30_CLI_ReferenceGuide/204910

QUESTION 432
What is considered Hybrid Emulation Mode?

A. Manual configuration of file types on emulation location.
B. Load sharing of emulation between an on premise appliance and the cloud.
C. Load sharing between OS behavior and CPU Level emulation.
D. Load Sharing of Threat Emulation Server and Firewall blade

Answer: B

QUESTION 433
You have pushed policy to GW-3 and now cannot pass traffic through the gateway. As a last resort, to restore traffic flow, what command would you run to remove the latest policy from GW-3?

A. fw unloadlocal
B. fw unloadpolicy
C. fwm unload local
D. fwm unload policy

Answer: A

QUESTION 434
If the Active Security Management Server fails or if it becomes necessary to change the Active to Standby, the following steps must be taken to prevent data loss. Providing the Active Security Management Server is responsive, which if these steps should NOT be performed:

A. Rename the hostname of the Standby member to match exactly the hostname of the Active member.
B. Change the Standby Security Management Server to Active.
C. Change the Active Security Management Server to Standby.
D. Manually synchronize the Active and Standby Security Management Servers.

Answer: A

QUESTION 435
The Log server sends what to the Correlation Unit?

A. Authentication requests
B. CPMI dbsync
C. Logs
D. Event Policy

Answer: C

QUESTION 436
Which component is NOT required to communicate with the Web Services API?

A. API key
B. session ID token
C. content-type
D. Request payload

Answer: A

QUESTION 437
Which of the following is NOT supported by CPUSE?

A. Automatic download of full installation and upgrade packages
B. Automatic download of hotfixes
C. Installation of private hotfixes
D. Offline installations

Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_AdminWebAdminGuide/html_frameset.htm?topic=documents/R77/CP_R77_Gaia_AdminWebAdminGuide/112109

QUESTION 438
What are the available options for downloading Check Point hotfixes in Gaia WebUI (CPUSE)?

A. Manually, Scheduled, Automatic
B. Manually, Automatic, Disabled
C. Manually, Scheduled, Disabled
D. Manually, Scheduled, Enabled

Answer: A
Explanation:
https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_AdminWebAdminGuide/html_frameset.htm?topic=documents/R77/CP_R77_Gaia_AdminWebAdminGuide/112109

QUESTION 439
Aaron is a Cyber Security Engineer working for Global Law Firm with large scale deployment of Check Point Enterprise Appliances running GaiA R80.X. The Network Security Developer Team is having an issue testing the API with a newly deployed R80.X Security Management Server. Aaron wants to confirm API services are working properly. What should he do first?

A. Aaron should check API Server status with “fwm api status” from Expert mode. If services are stopped, he should start them with “fwm api start”.
B. Aaron should check API Server status with “cpapi status” from Expert mode. If services are stopped, he should start them with “cpapi start”.
C. Aaron should check API Server status with “api status” from Expert mode. If services are stopped, he should start them with “api start”.
D. Aaron should check API Server status with “cpm api status” from Expert mode. If services are stopped, he should start them with “cpi api start”.

Answer: C

QUESTION 440
What is the command to check the status of Check Point processes?

A. top
B. cptop
C. cphaprob list
D. cpws_admin list

Answer: D
Explanation:
https://community.checkpoint.com/t5/General-Management-Topics/cpwd-admin-list-overview-SMS/td-p/29589


Resources From:

1.2020 Latest Braindump2go 156-315.80 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/156-315-80.html

2.2020 Latest Braindump2go 156-315.80 PDF and 156-215.80 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1quC-PgBlZuJnyF0Dfupr8FtnW_7zGcZ1?usp=sharing

3.2020 Latest Braindump2go 156-315.80 Exam Questions from:
https://od.lk/fl/NDZfMTI1OTc4NF8

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!