156-915.80 Exam Dumps, 156-915.80 Exam Questions, 156-915.80 PDF Dumps, 156-915.80 VCE Dumps, Check Point Exam

[2021-January-New]Braindump2go 156-915.80 PDF Dumps and 156-915.80 VCE Dumps[Q542-Q562]

2021/January Latest Braindump2go 156-915.80 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 156-915.80 Real Exam Questions!

QUESTION 542
Where do you find the migrate tool for upgrading?

A. Download from Gaia web portal or use migrate tool from the folder install ISO image linux \upgrade_tools
B. Download fromGaia web portal or find in target server folder $FWDIR/bin/upgrade_tools
C. Download the latest version from Check Point Support Center or find in target server folder $FWDIR/ bin/upgrade_tools

Answer: B

QUESTION 543
Choose the correct syntax to add a new host named “emailserver1” with IP address 10.50.23.90 using GAiA Management CLI?

A. mgmt._cli add host name “myHost12 ip” address 10.50.23.90
B. mgmt._cli add host name ip-address 10.50.23.90
C. mgmt._cli add host “emailserver1” address 10.50.23.90
D. mgmt._cli add host name “emailserver1” ip-address 10.50.23.90

Answer: D

QUESTION 544
What is the recommended number of physical network interfaces in a Mobile Access cluster deployment?

A. 4 Interfaces – an interface leading to the organization, a second interface leading to the internet, a third interface for synchronization, a fourth interface leading to the Security Management Server.
B. 3 Interfaces – an interface leading to the organization, a second interface leading to the internet, a third interface for synchronization
C. 1 interface – an interface leading to the organization and the Internet, and configure for synchronization
D. 2 interfaces – a data interface leading to the organization and the Internet, a second interface for synchronization

Answer: B

QUESTION 545
What are the main stages of a policy installation?

A. Verification & Compilation, Transfer and Commit
B. Initiation, Conversion and FWD REXEC
C. Verification, Commit, Installation
D. Initiation, Conversion and Save

Answer: A

QUESTION 546
You need to see which hotfixes are installed on your gateway, which command would you use?

A. cpinfo –h all
B. cpinfo –o hotfix
C. cpinfo –l hotfix
D. cpinfo –y all

Answer: D

QUESTION 547
What is the benefit of Manual NAT over Automatic NAT?

A. If you create a new Security Policy, the Manual NAT rules will be transferred to this new policy
B. There is no benefit since Automatic NAT has in any case higher priority over Manual NAT
C. You have the full control about the priority of the NAT rules
D. On IPSO and GAIA Gateways, it is handled in stateful manner

Answer: C

QUESTION 548
Which of the following is a task of the CPD process?

A. Invoke and monitor critical processes and attempts to restart them if they fail
B. Transfers messages between Firewall processes
C. Log forwarding
D. Responsible for processing most traffic on a security gateway

Answer: B

QUESTION 549
You are asked to check the status of several user-mode processes on the management server and gateway. Which of the following processes can only be seen on a Management Server?

A. fwd
B. fwm
C. cpd
D. cpwd

Answer: B

QUESTION 550
What are the blades of Threat Prevention?

A. IPS, QoS, AntiVirus, AntiBot, Threat Emulation/Extraction
B. DLP, AntiVirus, QoS, AntiBot, Threat Emulation/Extraction
C. IPS, AntiVirus, AntiBot
D. IPS, AntiVirus, AntiBot, Threat Emulation/Extraction

Answer: D

QUESTION 551
Which one of the following is NOT a configurable Compliance Regulation?

A. GLBA
B. CJIS
C. SOCI
D. NCIPA

Answer: C

QUESTION 552
Which statements below are CORRECT regarding Threat Prevention profiles in SmartConsole?

A. You can assign only one profile per gateway and a profile can be assigned to one rule Only.
B. You can assign multiple profiles per gateway and a profile can be assigned to one rule only.
C. You can assign multiple profiles per gateway and a profile can be assigned to one or more rules.
D. You can assign only one profile pre gateway and a profile can be assigned to one or more rules.

Answer: C

QUESTION 553
Which process handles connections from SmartConsole R80?

A. fwd
B. cpmd
C. cpm
D. cpd

Answer: C

QUESTION 554
John is using Management HA. Which Smartcenter should be connected to for marking changes?

A. secondary Smartcenter
B. active SmartConsole
C. connect virtual IP of Smartcenter HA
D. Primary Log Server

Answer: B

QUESTION 555
In R80, where do you manage your Mobile Access Policy?

A. Access Control Policy
B. Through the Mobile Console
C. Shared Gateways Policy
D. From the Dedicated Mobility Tab

Answer: A

QUESTION 556
What is the command to check the status of Check Point processes?

A. top
B. cptop
C. cphaprob list
D. cpwd_admin list

Answer: D

QUESTION 557
After verifying that API Server is not running, how can you start the API Server?

A. Run command “set api start” in CLISH mode
B. Run command “mgmt._cli set api start” in Expert mode
C. Run command “mgmt. api start” in CLISH mode
D. Run command “api start” in Expert mode

Answer: D

QUESTION 558
When running a query on your logs, to find records for user Toni with machine IP of 10.0.4.210 but exclude her tablet IP of 10.0.4.76, which of the following query syntax would you use?

A. Toni? AND 10.0.4.210 NOT 10.0.4.76
B. To** AND 10.0.4.210 NOT 10.0.4.76
C. Ton* AND 10.0.4.210 NOT 10.0.4.75
D. “Toni” AND 10.0.4.210 NOT 10.0.4.76

Answer: B

QUESTION 559
Check Point recommends configuring Disk Space Management parameters from Dashboard to delete old log entries when available disk space is less than or equal to _______.

A. 30%
B. 40%
C. 20%
D. 15%

Answer: D

QUESTION 560
In which formats can Threat Emulation forensics reports be viewed in?

A. TXT, XML and CSV
B. PDF and TXT
C. PDF, HTML, and XML
D. PDF and HTML

Answer: D

QUESTION 561
With MTA (Mail Transfer Agent) enabled the gateways manages SMTP traffic and holds external email with potentially malicious attachments. What is required in order to enable MTA (Mail Transfer Agent) functionality in the Security Gateway?

A. Threat Cloud Intelligence
B. Threat Prevention Software Blade Package
C. Endpoint Total Protection
D. Traffic on port 25

Answer: B

QUESTION 562
In what way are SSL VPN and IPSec VPN different?

A. SSL VPN is using HTTPS in addition to IKE, whereas IPSec VPN is clientless
B. SSL VPN adds and extra VPN header to the packet, IPsec VPN does not
C. IPsec VPN does not support two factor authentication, SSL VPN does support this
D. IPsec VPN uses an additional virtual adapter; SSL VPN uses the client network adapter only

Answer: D


Resources From:

1.2021 Latest Braindump2go 156-915.80 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/156-915.80.html

2.2021 Latest Braindump2go 156-915.80 PDF and 156-915.80 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1OnPXrdxunkJ6UnZwY6bxX1oLGiQQ50mf?usp=sharing

3.2020 Free Braindump2go 156-915.80 Exam Questions Download:
https://www.braindump2go.com/free-online-pdf/156-915.80-PDF-Dumps(529-541).pdf
https://www.braindump2go.com/free-online-pdf/156-915.80-VCE-Dumps(542-562).pdf

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!