2021/January Latest Braindump2go 200-301 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 200-301 Real Exam Questions!

QUESTION 370
When implementing a router as a DHCP server, which two features must be configured? (Choose two)

A. relay agent information
B. database agent
C. address pool
D. smart-relay
E. manual bindings

Answer: CE

QUESTION 371
An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used?

A. switchport trunk allowed vlan 10
B. switchport trunk native vlan 10
C. switchport mode trunk
D. switchport trunk encapsulation dot1q

Answer: D

QUESTION 372
What is a role of wireless controllers in an enterprise network?

A. centralize the management of access points in an enterprise network
B. support standalone or controller-based architectures
C. serve as the first line of defense in an enterprise network
D. provide secure user logins to devices on the network.

Answer: A

QUESTION 373
What is the maximum bandwidth of a T1 point-to-point connection?

A. 1.544 Mbps
B. 2.048 Mbps
C. 34.368 Mbps
D. 43.7 Mbps

Answer: A
Section: (none)
Explanation/Reference:
Explanation:
A Point to Point T1 service is a private data connection securely connecting two or more locations with T1 data speeds (1.54Mbps).

QUESTION 374
Refer to the exhibit. Which switch becomes the root of the spanning tree for VLAN 110?

A. Switch 1
B. Switch 2
C. Switch 3
D. Switch 4

Answer: B

QUESTION 375
Where does a switch maintain DHCP snooping information?

A. in the MAC address table
B. in the CAM table
C. in the binding database
D. in the frame forwarding database

Answer: C

QUESTION 376
What is the expected outcome when an EUI-64 address is generated?

A. The seventh bit of the original MAC address of the interface is inverted
B. The interface ID is configured as a random 64-bit value
C. The characters FE80 are inserted at the beginning of the MAC address of the interface
D. The MAC address of the interface is used as the interface ID without modification

Answer: A

QUESTION 377
Refer to Exhibit. Which configuration must be applied to the router that configures PAT to translate all addresses in VLAN 200 while allowing devices on VLAN 100 to use their own IP addresses?

A. Option A
B. Option B
C. Option C
D. Option D

Answer: D

QUESTION 378
Which CRUD operation corresponds to the HTTP GET method?

A. read
B. update
C. create
D. delete

Answer: A
Explanation:
GET: This method retrieves the information identified by the request URI. In the context of the RESTful web services, this method is used to retrieve resources. This is the method used for read operations (the R in CRUD).
https://hub.packtpub.com/crud-operations-rest/

QUESTION 379
What is an advantage of Cisco DNA Center versus traditional campus device management?

A. It supports numerous extensibility options including cross-domain adapters and third- party SDKs.
B. It supports high availability for management functions when operating in cluster mode.
C. It enables easy autodiscovery of network elements m a brownfield deployment.
D. It is designed primarily to provide network assurance.

Answer: A

QUESTION 380
Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. what is the reason for the problem?

A. The OSPF router IDs are mismatched.
B. Router2 is using the default hello timer.
C. The network statement on Router1 is misconfigured.
D. The OSPF process IDs are mismatched.

Answer: B

QUESTION 381
What does a router do when configured with the default DNS lookup settings, and a URL is entered on the CLI?

A. initiates a ping request to the URL
B. prompts the user to specify the desired IP address
C. continuously attempts to resolve the URL until the command is cancelled
D. sends a broadcast message in an attempt to resolve the URL

Answer: B

QUESTION 382
Refer to the exhibit. An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC- 2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN.
Which configuration meets these requirements?

A. Option A
B. Option B
C. Option C
D. Option D

Answer: C

QUESTION 383
Which condition must be met before an NMS handles an SNMP trap from an agent?

A. The NMS software must be loaded with the MIB associated with the trap.
B. The NMS must be configured on the same router as the SNMP agent
C. The NMS must receive a trap and an inform message from the SNMP agent within a configured interval
D. The NMS must receive the same trap from two different SNMP agents to verify that it is reliable.

Answer: A

QUESTION 384
What is the effect when loopback interfaces and the configured router ID are absent during the OSPF Process configuration?

A. No router ID is set, and the OSPF protocol does not run.
B. The highest up/up physical interface IP address is selected as the router ID.
C. The lowest IP address is incremented by 1 and selected as the router ID.
D. The router ID 0.0.0.0 is selected and placed in the OSPF process.

Answer: B

QUESTION 385
Which device controls the forwarding of authentication requests for users when connecting to the network using a lightweight access point?

A. TACACS server
B. wireless access point
C. RADIUS server
D. wireless LAN controller

Answer: D

QUESTION 386
A network administrator must enable DHCP services between two sites. What must be configured for the router to pass DHCPDISCOVER messages on to the server?

A. a DHCP Relay Agent
B. DHCP Binding
C. a DHCP Pool
D. DHCP Snooping

Answer: A

QUESTION 387
A network administrator needs to aggregate 4 ports into a single logical link which must negotiate layer 2 connectivity to ports on another switch.
What must be configured when using active mode on both sides of the connection?

A. 802.1q trunks
B. Cisco vPC
C. LLDP
D. LACP

Answer: D

QUESTION 388
Refer to the exhibit. Which path is used by the router for internet traffic?

A. 209.165.200.0/27
B. 10.10.10.0/28
C. 0.0.0.0/0
D. 10.10.13.0/24

Answer: C

QUESTION 389
How does a Cisco Unified Wireless network respond to Wi-Fi channel overlap?

A. It alternates automatically between 2.4 GHz and 5 GHz on adjacent access points
B. It allows the administrator to assign channels on a per-device or per-interface basis.
C. It segregates devices from different manufacturers onto different channels.
D. It analyzes client load and background noise and dynamically assigns a channel.

Answer: A

QUESTION 390
What is the difference regarding reliability and communication type between TCP and UDP?

A. TCP is reliable and is a connection-oriented protocol UDP is not reliable and is a connectionless protocol
B. TCP is not reliable and is a connection-oriented protocol; UDP is reliable and is a connectionless protocol
C. TCP is not reliable and is a connectionless protocol; UDP is reliable and is a connection- oriented protocol
D. TCP is reliable and is a connectionless protocol; UDP is not reliable and is a connection- oriented protocol

Answer: A

---

Resources From:

1.2021 Latest Braindump2go 200-301 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/200-301.html

2.2021 Latest Braindump2go 200-301 PDF and 200-301 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1N579lVwFMNcTo1QgOz_B6__zxBTx36ev?usp=sharing

3.2020 Free Braindump2go 200-301 PDF Download:
https://www.braindump2go.com/free-online-pdf/200-301-PDF(362-373).pdf
https://www.braindump2go.com/free-online-pdf/200-301-PDF-Dumps(350-361).pdf
https://www.braindump2go.com/free-online-pdf/200-301-VCE(386-397).pdf
https://www.braindump2go.com/free-online-pdf/200-301-VCE-Dumps(374-385).pdf

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!