August/2021 Latest Braindump2go NS0-162 Exam Dumps with PDF and VCE Free Updated! Following are some new NS0-162 Exam Questions!
You want to prepare your ONTAP cluster and your ESXi cluster to connect NFS datastores over a 10-GbE network using jumbo frames.
In this scenario, which three configurations would accomplish this task? (Choose three.)
A. Enable jumbo frames with an MTU of 1500 for your ESXi hosts
B. Enable jumbo frames with an MTU of 9000 for your ONTAP cluster
C. Enable jumbo frames with an MTU of 1500 for your ONTAP cluster
D. Enable jumbo frames with an MTU of 9000 for your ESXi hosts
E. Enable jumbo frames with an MTU of 9216 for your switches
Which two storage efficiency features are enabled by default on AFF systems? (Choose two.)
A. volume-level inline deduplication
B. aggregate-level compression
C. LUN-level compression
D. aggregate-level inline deduplication
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
A. The images must be manually uploaded to the cluster by using the ONTAP System Manager interface
B. The latest available images will appear in the ONTAP System Manager interface
C. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site
D. The update history is available within the ONTAP System Manager interface
Your company has purchased two NetApp AFF A400 HA pairs.
During deployment, how many root aggregates are created?
Click the Exhibit button.
You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port e0c or e0d on either storage node.
In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports?
A. Change the LIF’s failover policy to sfo-partner-only
B. Split the broadcast domain
C. Create a DNS load balancing zone
D. Create an IPspace
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.)
An application owner at your organization requests a solution for zero RTO in the event of a failure in your primary data center, where you are using NetApp ONTAP 9.8 software with iSCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?
A. SnapMirror Synchronous (SM-S)
B. SVM Disaster Recovery (SVM DR)
C. SnapMirror Business Continuity (SM-BC)
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware is located in two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.
In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
A. Use ONTAP Mediator service to make sure that you have a quorum for the two nodes
B. Use ONTAP Select Deploy to install the nodes on the physical hardware
C. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers
D. Install the SnapMirror Sync license on the cluster
You need to increase the number of files that can be created in a volume.
Which two methods enable you to achieve this goal? (Choose two.)
A. Increase the size of the volume
B. Set the space guarantee to “volume”
C. Set the fractional reserve to “0”
D. Increase the number of files permitted on the volume
You are asked by your network engineering team to make sure that your NetApp cluster is configured to run LACP on its network ports.
Which network component satisfies this request?
A. interface group
B. failover group
D. broadcast domain
Click the Exhibit button.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
A. NetApp Interoperability Matrix (IMT)
B. NetApp Hardware Universe (HWU)
C. Active IQ Unified Manager
D. Active IQ Config Advisor
Which three protocols are supported by NetApp ONTAP Select? (Choose three.)
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8.
In this scenario, which two statements are true? (Choose two.)
A. Use SnapMirror to replicate data from FlexVol to FlexGroup
B. Use XCP to copy data from a FlexVol to a FlexGroup
C. You can convert the FlexVol volume to a FlexGroup volume
D. A FlexVol to FlexGroup conversion is not supported
A. the failover-policy option
B. the data-protocol option
C. the subnet-name option
D. the auto-revert option
Click the Exhibit button.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host.
Referring to the exhibit, which action solves the problem?
A. Enable Kerberos in the export policy
B. Add NFSv4 to the access protocols
C. Add HOST 3’s IP address to the NFS export policy
D. Add SMB/CIFS to the access protocols
After attempting to perform an ONTAP upgrade, it fails during the pre-check.
In this scenario, what would cause this problem?
A. idle SnapMirrors
B. encrypted volumes
C. offline data LIF
D. offline volume
You have an Internet of Things (IoT) application that will use SMB shares on a remote ONTAP Select instance. There are no name services and only a local network is available at the remote IoT site.
In this scenario, which two features are supported by ONTAP software for the IoT application? (Choose two.)
A. SMB3 Witness protocol
B. SMB Server in workgroup mode
C. Active Directory users
D. CIFS local users
Your company wants their newly installed ONTAP system to automatically send telemetry data to NetApp to provide early notification of any security risks, bug fixes, and ONTAP updates. Furthermore, in case of hardware failures, a support case should be opened automatically at NetApp.
Which two NetApp components satisfy the requirements? (Choose two.)
A. ONTAP AutoSupport
B. Cloud Insights
C. Active IQ
D. Active IQ Unified Manager
You want to scale out storage performance for read-intensive data across multiple locations.
In this scenario, which NetApp feature accomplishes this task?
B. Flash Pool
You are currently using SnapMirror Synchronous (SM-S) to protect a critical workload at your organization and you want to convert the SnapMirror policy from Sync to StrictSync.
In this scenario, which procedure allows you to achieve this task?
A. Modify the existing SnapMirror relationship specifying the StrictSync policy, then re-synchronize it
B. Recreate the SnapMirror relationship, specifying the StrictSync policy, then promote it
C. Recreate the SnapMirror relationship, specifying the StrictSync policy, then re-synchronize it
D. Modify the existing SnapMirror relationship specifying the StrictSync policy, then promote it
Which security method would be used to authenticate targets and initiators in an ISCSI environment?
1.2021 Latest Braindump2go NS0-162 Exam Dumps (PDF & VCE) Free Share:
2.2021 Latest Braindump2go NS0-162 PDF and NS0-162 VCE Dumps Free Share:
3.2021 Free Braindump2go NS0-162 Exam Questions Download:
Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!