CompTIA Exam Dumps, N10-007 Exam Dumps, N10-007 Exam Questions, N10-007 PDF Dumps, N10-007 VCE Dumps

[February-2021]Braindump2go N10-007 PDF Dumps and N10-007 VCE Dumps[Q1120-Q1140]

2021/February Latest Braindump2go N10-007 Exam Dumps with PDF and VCE Free Updated Today! Following are some new N10-007 Real Exam Questions!

A network technician is assisting a user cannot connect to a wireless connection. The user is connecting to the correct SSID and has the correct pre-shared key. The technician verifies the WAP is working, and other clients are connected to it from same location. Which of the following should the technician investigate?

A. Channel overlap
B. Wireless frequency
C. AP power levels
D. Encryption type

Answer: A

A technician needs a way to allow clients to access a new application server on the network. Which of the following should the technician set up to achieve this objective? (Select TWO)

A. DHCP MAC reservation
B. DNS SRV record
C. DNS reverse zone
D. DHCP scope option
E. DHCP IP reservation
F. Cloud-hosted DNS

Answer: A

A technician needs to manage a Linux-based system from the GUI remotely. Which of the technician should the technician deploy?

D. Telnet

Answer: B

Which of the following BEST explains why a firewall would be subject to international export controls?

A. Protected industry
B. IP version incompatibility
C. Differing power standards
D. Encryption technology

Answer: C

In which of the following layers of the OSI model is checksum added to the end of an Ethernet frame?

A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5

Answer: A

Which of the following components should be used to provide interconnectivity between virtual machines in distinct broadcast domains inside the hypervisor’s environment?

A. Virtual router
B. Virtual switch
C. Virtual NIC
D. Virtual SAN

Answer: A

Which of the following would MOST likely provide continuous power during a short brownout?

A. Uninterruptible power supply
B. Hot site
C. Cold site
D. Generator
E. Redundant power supplies

Answer: A

A network technician receives a call from Joe, a user about slow speeds when he copies large files from the file server Other users can copy the same files in a matter of seconds. Prior to experiencing the slow speeds, Joe moved the computer farther from the network jack and built his own Cat5 cable.
During troubleshooting the on-site network technician observes Joe is only getting a 10Mbps connection speed while everyone else who is connected to the switch is getting 1000Mbps. Which of the following should the network technician check NEXT? (Select TWO)

A. Total length
B. RJ45 terminations
C. Desktop hardware
D. Switch configuration
E. Cable type
F. Latency

Answer: BE

While troubleshooting a connectivity issue, a network technician successfully pinged the loopback address and external DNS server tut was unable to ping the website’s URL.
Which of the following tools should the technician use to determine where the network issue is located?

A. Nmap
B. netstat
C. nslookup
D. ipconftg
E. tracert

Answer: E

Which of the follow ng are reasons for enabling jumbo frames? (Select TWO)

A. To increase payload size
B. To increase bandwidth
C. To provide additional SANs storage capacity
D. To implement larger SQL queries
E. To reduce CPU overhead

Answer: AE

A network engineer is adding a second router to the company’s topology to connect a new wing of the building. The second router will be in the same server room as the first router and does not support auto-MDX.
Which of the following describes how the routers should be connected to each other?

A. Connect the second router to the first router with a crossover cable.
B. Use a straight-through cable to connect the two routers together.
C. Connect the two routers with vendor-specific console cables.
D. Connect the AUX ports directly between the two routers.

Answer: A

A network technician is installing a network printer in a factory setting. The connection from the switch contains an LC connector, yet the printer only supports an RJ45 connector.
Which of the following should the technician use?

A. Range extender
B. Media converter
C. Multilayer switch
D. Load balancer

Answer: A

A network technician is implementing a new IPv6 addressing scheme al a local office.
This is a large office, and the network manager would like a solution that saves time and allows for automatic addressing of nodes.
Which of the following would BEST accomplish this?

B. 6 to 4 tunnel
C. NAT64
D. EUI-64

Answer: A

As part of a new datacenter upgrade project, the security manager has asked for additional physical security to prevent asset theft. Which of the following technologies should be implemented?

A. Video surveillance
B. Motion detection alarms
C. Asset tracking tags
D. Locks on devices

Answer: B

A network administrator is concerned about the management traffic between a machine and the corporate router. Which of the following protocols should the administrator use to prevent a security breach?


Answer: B

A network technician needs to visit a datacenter. To be admitted the security officer requests to see a driver’s license, and then directs the technician to a fingerprint scanner. Which of the following authentication factors is the facility requiring for admittance? Select TWO).

A. Something you have
B. Something you know
C. Something you do
D. Something you are
E. Somewhere you are

Answer: BE

Users are reporting that the company website is responding. A technician performs the following steps:
1. Pings th loopback address
2. Pings the default gateway
3. Pings the DNS server
4. Pings the IP address of the web server
All tests are successful, but users still report the server is unreachable. The technician next performs an nslockup and receives the proper server IP address.
Which of the following would cause the website to be unreachable?

A. Unresponsive service
B. Incorrect gateway
C. Name not resolving
D. Rogue DHCP server
E. DNS forward lookup error

Answer: A

A network technician is reviewing the network configuration of a large company. All of the branch routers are connected to each other to allow for redundancy. Which of the following BEST describes this network topology?

A. Mesh
B. Ring
C. Bus
D. Star

Answer: A

A network engineer is deploying a new PBX for a customer Although all new phones will be IP- based, the office will still use a few POTS-based phones and a fax line. Which of the following will be needed to connect the fax line?

A. RJ11
B. RJ45
C. DB-9
D. F-type

Answer: D

A company recently upgraded a legacy firewall to an NGFW.
Which of the following can be deployed without extra hardware to restrict access to offending websites?

A. A UTM appliance
B. Content filtering
D. A proxy server

Answer: B

A consultant is designing a new network for a company that will be hosting its own email and web servers. The company wants to ensure there are separate devices to protect the internal network from the DMZ and the DMZ from the Internet.
Which of the following would provide this protection?

A. The installation of a firewall with multiple interfaces for the Internet to the DMZ and the LAN
B. The in-line installation of two firewalls to divide the Internet to the DMZ and the DMZ to the LAN
C. The installation of two switches to divide the Internet from the LAN and the LAN to the DMZ
D. The installation of a switch from the Internet to the DMZ and a firewall between the DMZ and the LAN

Answer: C

Resources From:

1.2021 Latest Braindump2go N10-007 Exam Dumps (PDF & VCE) Free Share:

2.2021 Latest Braindump2go N10-007 PDF and N10-007 VCE Dumps Free Share:

3.2020 Free Braindump2go N10-007 Exam Questions Download:

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!