70-743 Exam Dumps, 70-743 Exam Questions, 70-743 PDF Dumps, 70-743 VCE Dumps, Microsoft Exam

[October-2020]New Braindump2go 70-743 PDF Dumps and 70-743 VCE Dumps[Q313-Q333]

2020/October Latest Braindump2go 70-743 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 70-743 Real Exam Questions!

QUESTION 313
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Server Manager, you run Retrieve Event Catalog Data.
Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/jj878322(v=ws.11)

QUESTION 314
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/jj878322(v=ws.11)

QUESTION 315
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Windows PowerShell, you run the Set-IpamDHCPServer cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/jj878322(v=ws.11)

QUESTION 316
You have a server named Server1 that runs Windows Server 2016. Server1 contains a volume named D. Volume D contains the folders shown in the following table.
image_thumb
You enable Data Deduplication.
Which folder will benefit the least from Data Deduplication?

A. Folder3
B. Folder4
C. Folder1
D. Folder2

Answer: C
Explanation:
https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/overview

QUESTION 317
You have a DNS server named Server1 that runs Windows Server 2016. Server1 has an Active Directory- integrated zone named adatum.com.
All client computers run Windows 10.
You recently encountered unexpected responses to DNS client queries in the adatum.com zone.
You need to log all the records written to the zone.
Which cmdlet should you run?

A. Set-DnsServerDsSetting
B. Add-DnsServerQueryResolutionPolicy
C. Set-DnsServer
D. Set-DnsServerDiagnostics

Answer: D
Explanation:
https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverdiagnostics?view=win10-ps

QUESTION 318
Your network contains two Active Directory forests named fabrikam.com and contoso.com. Each forest contains two sites. Each site contains two domain controllers.
You need to configure all the domain controllers in both the forests as global catalog servers.
Which snap-in should you use?

A. Active Directory Federation Services
B. Active Directory Sites and Services
C. Active Directory Users and Computers
D. Active Directory Domains and Trusts

Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/manage/ad-forest-recovery-add-gc

QUESTION 319
You have a DNS server named Server1 that runs Windows Server 2016. Server1 has a DNSSEC-signed zone named contoso.com.
You need to implement DNS-based Authentication of Named Entities (DANE).
What should you do?

A. From DNS Manager, modify the security of Server1
B. From PowerShell, run the Add-DnsServerResourceRecord cmdlet and specify the –VirtualizationInstance parameter
C. From DNS Manager, modify the advanced properties of contoso.com
D. From PowerShell, run the Add-DnsServerResourceRecord cmdlet and specify the –TLSA parameter

Answer: D
Explanation:
https://weberblog.net/how-to-use-danetlsa/
https://docs.microsoft.com/en-us/powershell/module/dnsserver/add-dnsserverresourcerecord?view=win10-ps

QUESTION 320
You need to capture a Windows Server 2016 Datacenter image to a WIM file. The solution must exclude the C:\Windows.old folder.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Run Windows Configuration Designer and select the Advanced provisioning option
B. Run dism.exe and specify the /Scratchdir parameter
C. Create a text file that contains an [ExclusionException] section
D. Create a text file that contains an [ExclusionList] section
E. Run dism.exe and specify the /ConfigFile parameter
F. Create a text file that contains an [CompressionExclusionList] section

Answer: DE
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/dism-image-management-command-line-options-s14
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/dism-configuration-list-and-wimscriptini-files-winnext

QUESTION 321
You have a Hyper-V host named HV1 that runs Windows Server 2016. HV1 is a guarded host that is part of a guarded fabric. HV1 receives updates through the Semi-Annual Channel.
HV1 hosts the virtual machines shown in the following table.
image_thumb[1]
HV1 has the virtual switches shown in the following table.
image_thumb[2]
All the virtual machines are running and are joined to the same domain.
To which virtual machine can you connect by using PowerShell Direct?

A. VM1, VM2, VM3, and VM4
B. only VM1 and VM3
C. only VM2 and VM4
D. only VM3 and VM4

Answer: D
Explanation:
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/manage-windows-virtual-machines-with-powershell-direct
https://docs.microsoft.com/en-us/virtualization/community/team-blog/2015/20150514-powershell-direct-running-powershell-inside-a-virtual-machine-from-the-hyper-v-host

QUESTION 322
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 has the following settings:
– Nested virtualization is enabled
– Dynamic Memory is disabled
– VM1 is currently running.
You need to adjust the amount of memory assigned to VM1 as quickly as possible.
What should you do first?

A. Pause VM1
B. Change the memory buffer setting of VM1
C. Enable Dynamic Memory for VM1
D. Shut down VM1

Answer: D
Explanation:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/nested-virtualization

QUESTION 323
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 hosts four virtual machines that are members of the domain. The virtual machines are configured as shown in the following table.
image_thumb[3]
Which virtual machine can you manage by using PowerShell Direct?

A. only VM4
B. only VM2
C. VM1, VM2, and VM3
D. VM1, VM2, and VM4

Answer: D
Explanation:
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/manage-windows-virtual-machines-with-powershell-direct

QUESTION 324
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.
Each server has a single 4-TB SATA hard disk.
To each server, you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

A. Add-ClusterSharedVolume –Name “Disk 1” –Cluster Cluster1
B. Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
C. New-ClusterStorageEnclosure -id 1 –name Cluster1 –type jbod –ConnectionString “Server1,Server2,Server3,Server4”
D. New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage

Answer: D
Explanation:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploy-storage-spaces-direct
https://docs.microsoft.com/en-us/powershell/module/failoverclusters/new-cluster?view=win10-ps

QUESTION 325
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure.
What should you do?

A. From Windows PowerShell, run the Get-ClusterNode cmdlet
B. From Windows PowerShell, run the Get-ClusterLog cmdlet
C. From Event Viewer, review the Application event log
D. From Event Viewer, review the System event log

Answer: D
Explanation:
https://docs.microsoft.com/en-us/windows-server/failover-clustering/system-events

QUESTION 326
Hotspot Question
You have a Hyper-V host named Server1 that runs Windows Server 2016 Datacenter. Server1 is activated.
On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2016 Standard.
You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
image_thumb[4]
Answer:
image_thumb[5]
Explanation:
https://docs.microsoft.com/en-us/windows-server/get-started-19/vm-activation-19

QUESTION 327
Drag and Drop Question
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2016. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit. (Click the Exhibit tab.)
image_thumb[6]
You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
image_thumb[7]
Answer:
image_thumb[8]
Explanation:
https://docs.microsoft.com/en-us/powershell/module/hyper-v/resize-vhd?view=win10-ps
https://docs.microsoft.com/en-us/powershell/module/storage/resize-partition?view=win10-ps

QUESTION 328
Hotspot Question
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1 that has two network adapters.
You need to create a NIC team on VM1.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
image_thumb[9]
Answer:
image_thumb[10]
Explanation:
https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic-teaming/create-a-new-nic-team-on-a-host-computer-or-vm
https://docs.microsoft.com/en-us/powershell/module/netlbfo/new-netlbfoteam?view=win10-ps

QUESTION 329
Hotspot Question
You have a stretch cluster that contains four nodes.
You run Get-ClusterFaultDomain and receive the output shown in the exhibit. (Click the Exhibit tab.)
image_thumb[11]
Node1 and Node2 are in a data center in an Active Directory site named London_Site. Node3 and Node4 are in an Active Directory site named Berlin_Site.
You need to ensure that the active nodes are in London_Site unless both Node1 and Node2 are offline.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
image_thumb[12]
Answer:
image_thumb[13]
Explanation:
https://techcommunity.microsoft.com/t5/failover-clustering/site-aware-failover-clusters-in-windows-server-2016/ba-p/372060

QUESTION 330
Drag and Drop Question
Your network contains an Active Directory domain named adatum.com. The domain contains four member servers that run Windows Server 2016.
On each server, you locally attach three disks and install the Failover Clustering feature.
You need to create a volume that uses all the disks. The volume must be highly available.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
image_thumb[14]
Answer:
image_thumb[15]
Explanation:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploy-storage-spaces-direct

QUESTION 331
Hotspot Question
Your network contains an Active Directory domain named adatum.com. The domain contains the servers configured as shown in the following table.
image_thumb[16]
You have a server named Server6 in the perimeter network.
Each server has the local users shown in the following table.
image_thumb[17]
You install a Web Application Proxy on Server6.
You need to configure the Web Application Proxy on Server6. The solution must use the principle of least privilege.
Which account should you specify in the Web Application Proxy Configuration Wizard? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
image_thumb[18]
Answer:
image_thumb[19]
Explanation:
http://www.mistercloudtech.com/2015/11/25/how-to-install-and-configure-web-application-proxy-for-adfs/

QUESTION 332
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2016.
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.
You deploy Active Directory Federation Services (AD FS) and a Web Application Proxy to the Active Directory domain.
You need to configure the AD FS deployment to support Azure Multi-Factor Authentication (MFA) as the primary authentication method.
Which three actions should you perform in sequence on the AD FS server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
image_thumb[20]
Answer:
image_thumb[21]
Explanation:
https://docs.microsoft.com/en-us/windows-server/identity/ad-fs/operations/configure-ad-fs-and-azure-mfa

QUESTION 333
Hotspot Question
You have a Hyper-V host named Server1 that runs the virtual machines shown in the following table.
image_thumb[23]
All the virtual machines run Windows Server 2016. The firewalls of the virtual machines are configured to allow ping requests.
The network adapters connect to a virtual switch named Switch1. Switch1 is configured as shown in the following exhibit.
image_thumb[27]
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
image_thumb[25]
Answer:
image_thumb[26]
Explanation:
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/get-started/create-a-virtual-switch-for-hyper-v-virtual-machines
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/configure-virtual-local-areal-networks-for-hyper-v


Resources From:

1.2020 Latest Braindump2go 70-743 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/70-743.html

2.2020 Latest Braindump2go 70-743 PDF and VCE Dumps Free Share:
https://drive.google.com/drive/folders/0B75b5xYLjSSNUVNnV1llcTVXV2M?usp=sharing

3.2020 Free Braindump2go 70-743 PDF Download:
https://www.braindump2go.com/free-online-pdf/70-743-PDF-Dumps(313-323).pdf
https://www.braindump2go.com/free-online-pdf/70-743-VCE-Dumps(324-333).pdf

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!