October/2023 Latest Braindump2go MS-700 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Braindump2go MS-700 Real Exam Questions!

QUESTION 285
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
You need to ensure that file sharing during Teams chats meets the technical requirements of the marketing department.
What should you do?

A. Create a retention policy for the SharePoint sites location.
B. Enable Customer Lockbox.
C. Create a retention policy for Teams chats.
D. Create a data loss prevention (DLP) policy for Teams chat and channel messages.
E. Create a retention policy for the OneDrive accounts location.

Answer: A
Explanation:
Files shared in Team chats are stored in Sharepoint, therefore that needs to have a retention policy set to that duration.

QUESTION 286
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
You need to implement the planned change for the Edmonton field site.
What should you create?

A. a network roaming policy
B. a voice routing policy
C. a calling policy
D. a meeting policy
E. a messaging policy

Answer: A
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/network-roaming-policy
This policy enables you to assign settings to network sites. The Teams client will dynamically pick up the settings based on which network site it connects to. When the Teams client signs in from a network site with a roaming policy assigned, that policy will be used. If there is no policy assigned, the values set in the meeting policy will be used.
The TeamsNetworkRoamingPolicy contains the following parameters:
AllowIPVideo – This setting controls whether video can be turned on in meetings hosted by a user and in 1:1 and group calls started by a user.
MediaBitRateKb – This setting determines the total average media bit rate for audio, video, and video-based app sharing transmissions in calls and meetings for the user.

QUESTION 287
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
You need to implement the planned changes for the marketing department.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Set Invite external users to shared channels to On for the Global (Org-wide default) Teams policy.
B. From the Azure Active Directory admin center, configure the B2B direct connect outbound access settings for external users and groups.
C. From the Azure Active Directory admin center, configure the B2B direct connect inbound access settings for external users and groups.
D. Set Join external shared channels to On for the Teams policy of the marketing department.
E. Set Invite external users to shared channels to On for the Teams policy of the marketing department.

Answer: CE

QUESTION 288
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Hotspot Question
You need to implement the planned changes for the marketing department and the project management department. The solution must meet the technical requirements.
Which type of channel should you use for each department? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 289
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Drag and Drop Question
You need to implement the planned changes for Viva Connections.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

QUESTION 290
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Which license should you purchase to meet the technical requirements of the marketing department to apply a watermark?

A. Microsoft Priva Privacy Risk Management
B. Microsoft Priva Subject Rights Requests
C. Microsoft Teams Premium
D. Microsoft Defender for Cloud Apps

Answer: C

QUESTION 291
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
You need to resolve the issue reported by the project management department users.
What should you do?

A. Instruct the users to launch Teams and select Check for updates.
B. Uninstall the current Teams client, and then reinstall the latest version of the client.
C. From the Microsoft Teams admin center, create and assign a new meeting policy.
D. From the Microsoft Teams admin center, modify the Meeting settings.

Answer: C

QUESTION 292
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Drag and Drop Question
You need to configure the pilot for the New York office.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoftteams/operator-connect-plan

QUESTION 293
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Hotspot Question
You need to configure a policy for the IT department to meet the technical requirements for training videos.
How should you complete the PowerShell cmdlet? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 294
Case Study 3: ADatum Corporation
Overview
Company Information
ADatum Corporation is an energy company that has offices across North America and 3,000 employees.
Physical Locations
ADatum has the offices shown in the following table.

Existing Environment
Network Infrastructure
The office in Calgary has a 1-Gbps internet circuit. The offices in San Diego and New York have 100-Mbps internet circuits. The field site in Edmonton has a 3-Mbps internet circuit.
Departments
ADatum has the following departments:
– Information technology (IT)
– Project management
– Marketing
Microsoft 365 and Tenants Environment
ADatum recently purchased a Microsoft 365 E5 subscription that has the Microsoft Teams Domestic Calling Plan add-on. All users are assigned Microsoft 365 E5 and Microsoft Teams Domestic Calling Plan licenses and Calling Plans is deployed.
Azure AD has the default Cross-tenant access settings configured.
The Teams policies settings are configured as shown in the following exhibit.

The Teams client is deployed to a non-persistent Virtual Desktop Infrastructure (VDI) used by the project management department.
Allow guest access in Teams is set to Off.
The Microsoft Viva Connections app is deployed to all users.
Problem Statements
ADatum identifies the following issues:
– An executive at the San Diego office reports that video drops during Teams meetings.
– The Edmonton field site has limited bandwidth, and users report poor audio during Teams calls and meetings.
– Users in the project management department report that they cannot give or take control during Teams calls and meetings while sharing their VDI desktop.
Planned Changes
ADatum plans to implement the following changes:
– Configure the media bit rate settings for the users at the Edmonton field site. The settings must apply only to the user while they are at the site, but NOT when they are at a different office.
– Create a Teams channel to enable the project management department to collaborate with the IT department on a device upgrade project.
– Implement a pilot rollout of Operator Connect for the users in the New York office. A port re-quest was accepted already.
– Create a Teams channel for the marketing department for external collaboration.
– Rename the Viva Connections icon as Start portal.
Technical Requirements
ADatum identifies the following technical requirements:
– The marketing department requires that all the files shared by using Teams remain available for at least three years after deletion.
– The marketing department must be able to apply a watermark to content and video shared dur-ing Teams meetings.
– All users require indefinite access to training videos recorded in Teams by the IT department.
– All access to Teams and shared resources must use the principle of least privilege.
– Guest access must remain disabled.
Hotspot Question
You need to troubleshoot the issues reported by the users in the San Diego office and the Edmonton field site.
What should you use for each office? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 295
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You plan to deploy a Microsoft Teams display device.
You need to enable automatic provisioning.
Which type of resource account should you create, and what should you use to identify the device? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://docs.microsoft.com/en-us/microsoftteams/devices/remote-provision-remote-login
https://docs.microsoft.com/en-us/microsoftteams/devices/resource-account-ui

QUESTION 296
You have a Microsoft 365 subscription.
You plan to implement Microsoft Teams.
You need to perform network quality and connectivity tests from an on-premises network to Microsoft 365 Online services by using the Network Testing Companion.
You install the Network Testing Companion module on a local Windows 10 device.
Which additional software should you install to perform the tests?

A. Network Assessment Tool
B. Windows Performance Analyzer (WPA)
C. the Microsoft Teams desktop client
D. Windows Assessment Toolkit

Answer: A
Explanation:
You can download Skype for Business Network Assessment Tool which does connectivity test with Microsoft Teams.
https://www.microsoft.com/en-us/download/details.aspx?id=53885

QUESTION 297
You plan to deploy Microsoft Teams to a remote location.
You perform a network readiness assessment for Microsoft Teams by using the Network Testing Companion.
Which two tests are included in the assessment? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. trace route information
B. video quality tests
C. open and blocked ports
D. audio quality tests
E. Quality of Service (QoS) validation

Answer: CD

QUESTION 298
You have a Microsoft 365 subscription that uses Microsoft Teams and contains the groups shown in the following table.

Which groups can be converted into a team?

A. Group1 only
B. Group2 only
C. Group4 only
D. Group2 and Group3 only
E. Group1, Group2, Group3, and Group4

Answer: B
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/limits-specifications-teams
Maximum size of distribution list, security group or Microsoft 365 group that can be imported in to a team 3,500.
Maximum number of members in a Microsoft 365 group that can be converted to a team 10,000.

QUESTION 299
Hotspot Question
You are reviewing the planned implementation of information barriers for your company.
You run the following command.

You activate the information barrier policies.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: Yes
To allow one segment to communicate with only one other segment, use the New-InformationBarrierPolicy cmdlet with the SegmentsAllowed parameter.
When you want to block segments from communicating with each other, you define two policies: one for each direction. Each policy blocks communication one way only.
Box 2: No
When you want to block segments from communicating with each other, you define two policies: one for each direction. Each policy blocks communication one way only.
Box 3: No
Block policies prevent one segment from communicating with another segment.
Allow policies allow one segment to communicate with only certain other segments.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/information-barriers-policies

QUESTION 300
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You have the users shown in the following table.

You have the team shown in the following table.

You create a new group naming policy as shown in the following exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: No
When group naming policy is configured, the policy will be applied to new Microsoft 365 groups (including teams) created by end users.
For existing Microsoft 365 groups, the policy will not immediately apply at the time of configuration. Once group owner edits the group name for these groups, naming policy will be enforced, even if no changes are made.
Box 2: No
User2 is a member of the Collaboration group, not the Projects group.
You can use attributes that can help you and your users identify which department, office or geographic region for which the group was created. For example, if you define your naming policy as PrefixSuffixNamingRequirement = “GRP [GroupName] [Department]”, and User’s department = Engineering, then an enforced group name might be ג€GRP My Group Engineering.
Note: The naming policy is applied to creating or editing groups (including teams) created across workloads (for example, Outlook, Microsoft Teams, SharePoint, Exchange, or Planner), even if no editing changes are made.
Box 3: Yes
User3’s department is Projects.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/enterprise-users/groups-naming-policy
https://activedirectoryfaq.com/2021/02/define-teams-naming-policies/

QUESTION 301
Your company uses Microsoft Teams.
A URL protection report shows many Blocked and clicked through actions.
You need to prevent users from clicking through to blocked URLs.
Which type of policy should you configure?

A. Anti-spam
B. Anti-phishing
C. Safe Attachments
D. Safe Links

Answer: D
Explanation:
Safe Links is a feature in Defender for Office 365 that provides URL scanning and rewriting of inbound email messages in mail flow, and time-of-click verification of URLs and links in email messages and other locations. Safe Links scanning occurs in addition to the regular anti-spam and anti-malware protection in inbound email messages in Exchange Online Protection (EOP). Safe Links scanning can help protect your organization from malicious links that are used in phishing and other attacks.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/safe-links

QUESTION 302
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You have a team named Project1 that contains the users shown in the following table.

You create a Microsoft 365 groups expiration policy that has the following configurations:
– Group lifetime (in days): 180
– Email contact for groups with no owners: Admin1
– Enable expiration for these Microsoft 365 groups: Project1
The group expiration for Project1 is May 31, 2022.
Which users will be notified to renew Project1, and when the users will receive their first renewal notification? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: User 1 only
Renewal notifications are emailed to group owners 30 days, 15 days, and one day prior to group expiration. Project1 has User1 as owner so this user will receive a renewal notification and not Admin1. Admin 1 would only receive the renewal notifications if Project1 team was without an owner.
Box 2: May 1, 2022
First renewal notification will take place 30 days prior to group expiration.

QUESTION 303
Drag and Drop Question
Your company uses Teams.
All users are assigned a Microsoft 365 E3 license.
You need to purchase add-on licenses that will enable the following features for the Teams environment:
– Microsoft Purview Information Barriers
– Data loss prevention (DLP) for Teams chat and channel messages
– Safe attachments for Microsoft SharePoint, OneDrive, and Teams
Which add-on license should you purchase for each feature? To answer, drag the appropriate licenses to the correct features. Each license may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Pureview need E5 compliance license
https://www.microsoft.com/en-us/security/business/compliance/e5-compliance?activetab=pivot%3aoverviewtab
For DLP there are various licenses, but the only one in the list is the compliance license
https://learn.microsoft.com/en-us/microsoft-365/compliance/dlp-microsoft-teams?view=o365-worldwide

QUESTION 304
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams to collaborate with guest users.
You need to use monthly active users (MAU) billing and access reviews to monitor the team membership of the guest users.
Which additional licenses should you assign, and what should you do to enable MAU billing? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/azure/active-directory/governance/access-reviews-overview#license-requirements
https://learn.microsoft.com/en-us/azure/active-directory/external-identities/external-identities-pricing

QUESTION 305
You have a Microsoft 365 E5 subscription that uses Teams.
When you attempt to create a new sensitivity label for Teams, you discover that the Groups & sites option is unavailable as shown in the following exhibit.

You need to be able to select Groups & sites when you create the sensitivity label.
Which cmdlet should you run?

A. Set-UnifiedGroup
B. Set-AzureADDirectorySetting
C. Set-CsTeamsEnhancedEncryptionPolicy
D. Set-SPOSiteOffice365Group

Answer: B
Explanation:
https://learn.microsoft.com/en-us/azure/active-directory/enterprise-users/groups-assign-sensitivity-labels
Set-AzureADDirectorySetting -Id $grpUnifiedSetting.Id -DirectorySetting $Setting

QUESTION 306
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 3
Adele Vance is a member of your company’s technology adoption team.
You need to provide only Adele with the ability to turn on and off Teams preview features.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 307
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 10
You need to set Microsoft SharePoint as the only cloud storage option for all teams.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 308
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 11
You need to restrict external Teams communication for both calling and personal chat to only organizational users that use the microsoft.com domain.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 309
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 12
You need to create a Microsoft 365 group named TeamsAdmin that can manage Teams Phone configurations without being able to manage teams and channels.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 310
Drag and Drop Question
You have a Microsoft 365 E5 subscription that uses Microsoft Teams.
You need to ensure that the users in your organization can communicate with external users who use Teams for personal use.
How should you complete the PowerShell cmdlets? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/powershell/module/skype/set-cstenantfederationconfiguration

QUESTION 311
You have a Microsoft 365 E3 subscription that uses Microsoft Teams.
You plan to deploy 20 conference phones that will support Direct Routing and one-touch join for Teams calendar meetings.
Which type of license do you require for each phone?

A. Common Area Phone
B. Microsoft 365 Business Standard
C. Microsoft Teams Rooms Standard
D. Microsoft 365 E3

Answer: C
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/rooms/rooms-licensing

QUESTION 312
Drag and Drop Question
Your company has a trading department and a research department.
The company purchases a Microsoft 365 E5 subscription.
You plan to deploy Microsoft 365 E5 licenses to all users.
You need to block communication between the users in the trading department and the users in the research department.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoft-365/compliance/information-barriers-policies?view=o365-worldwide

QUESTION 313
Drag and Drop Question
You have a Microsoft 365 E5 subscription that contains a Microsoft Teams team named Confidential.
You need to ensure that guest users cannot be added to the Confidential team.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
$GroupName = “<GroupName>”
Connect-AzureAD
$template = Get-AzureADDirectorySettingTemplate | ? {$_.displayname -eq “group.unified.guest”}
$settingsCopy = $template.CreateDirectorySetting()
$settingsCopy[“AllowToAddGuests”]=$False
$groupID= (Get-AzureADGroup -SearchString $GroupName).ObjectId
New-AzureADObjectSetting -TargetType Groups -TargetObjectId $groupID -DirectorySetting $settingsCopy
https://learn.microsoft.com/en-us/microsoft-365/solutions/per-group-guest-access?view=o365-worldwide

QUESTION 314
You have a Microsoft 365 subscription named contoso.com that uses Microsoft Teams.
You need to ensure that Microsoft Teams users can perform the following tasks:
– Search for customers that use Skype (Consumer).
– Start a Skype chat with the customers.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. From the Microsoft Teams admin center, turn on guest access.
B. From the Microsoft Teams admin center, turn on external access.
C. Add a _sipfederationtls SRV record to the contoso.com DNS domain.
D. Add a _sipinternaltls SRV record to the contoso.com DNS domain.
E. From the Azure portal, configure Azure AD B2C.

Answer: BC

QUESTION 315
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You need to analyze the following:
– The call and meeting quality of individual users
– The call and meeting quality trends of your company
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoftteams/monitor-call-quality-qos

QUESTION 316
Your company uses Microsoft Teams.
You are assigned the Groups Administrator role.
You discover that you cannot create an expiration policy in Microsoft 365.
You need to create the expiration policy. The solution must use the principle of least privilege.
What should you do first?

A. Upgrade the Azure AD license.
B. Modify the global (Org-wide default) app permission policy.
C. Request the Global Administrator role.
D. Purchase a Microsoft Defender for Identity license.

Answer: C
Explanation:
When you sign up for Microsoft 365 Business, you automatically become a global admin. So you have to assume in this scenario there was already a global admin in place.
https://learn.microsoft.com/en-us/microsoft-365/admin/add-users/assign-admin-roles?view=o365-worldwide

QUESTION 317
Hotspot Question
Your company uses Microsoft Teams and has the users shown in the following table.

You plan to use Call Quality Dashboard (CQD) to monitor call and meeting quality.
You need to ensure that CQD displays current network and tenant data in reports.
Which action should be performed, and which user can perform the action? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoftteams/using-admin-roles

QUESTION 318
You have a Microsoft 365 E3 subscription that contains 500 users. All the users have computers that run Windows 10 and are joined to Azure AD.
You need to generate a report that identifies which documents the users copied from Microsoft Teams to USB devices.
What should you do first?

A. Create a custom data loss prevention (DLP) policy.
B. Assign the Enterprise Mobility + Security E5 add-on to each user.
C. Onboard the Windows 10 computers to Endpoint data loss prevention (Endpoint DLP).
D. Assign the Microsoft 365 E5 compliance add-on to each user.

Answer: D
Explanation:
To access and use Endpoint DLP functionality, you must have one of these subscriptions or add-ons.
Microsoft 365 E5
Microsoft 365 A5 (EDU)
Microsoft 365 E5 compliance
Microsoft 365 A5 compliance
Microsoft 365 E5 information protection and governance
Microsoft 365 A5 information protection and governance

QUESTION 319
Your on-premises network contains a main site and a branch site.
You have a Microsoft 365 subscription that uses Teams.
You need to use Network planner to identify the networking requirements between the sites.
From Network planner, you create a new network plan.
What should you do next?

A. Configure the Network settings.
B. Add a network site.
C. Start a report.
D. Add personas.

Answer: D
Explanation:
The next step after creating a network plan is to add personas, then add sites:
https://learn.microsoft.com/en-us/microsoftteams/tutorial-network-planner-example?tutorial-step=2

QUESTION 320
Hotspot Question
You have a Microsoft 365 subscription that uses Teams and contains a domain named contoso.com.
A user named [email protected] uses a Teams Rooms device named roo[email protected] and a Microsoft Surface Hub named [email protected].
You need to configure [email protected] to meet the following requirements:
– [email protected] and [email protected] must join meetings simultaneously.
– User1 must be able to configure the video settings of the Surface Hub.
How should you complete the XML file? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoftteams/rooms/xml-config-file
“This is a comma-separated list of UPNs for each Teams Rooms device or Surface Hub that the device should accept meeting join requests from, or to which meeting join requests should be sent.”
Coordinated meetings configures multiple devices to join the same meeting and how the peripherals need to behave when they do. It’s not driven from the user but from the room touchpanel.

QUESTION 321
Your company has a Microsoft 365 subscription. All users are assigned a Microsoft 365 E3 license.
You need to implement information barriers between two groups of users.
Which two licensing add-ons provide the required functionality? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Compliance
B. Insider Risk Management
C. Microsoft Defender for Office 365
D. Communications Credits

Answer: AB
Explanation:
https://learn.microsoft.com/en-us/microsoft-365/compliance/information-barriers-policies?view=o365-worldwide

QUESTION 323
Hotspot Question
Your company uses Microsoft Teams.
You have a team named Team1.
You need to prevent users from posting animated images to Team1.
How should you complete the PowerShell cmdlet? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://support.microsoft.com/en-us/office/send-an-emoji-gif-or-sticker-in-teams-174248c9-e64d-4de1-9f41-3199cc0751ad
https://learn.microsoft.com/en-us/powershell/module/teams/set-team?view=teams-ps

QUESTION 324
You have a Microsoft 365 E5 subscription that uses Microsoft Teams.
Users report that their presence information is available to external partners.
You need to ensure that the presence information is available only to the external partners on the users’ contact lists.
What should you do?

A. From PowerShell, run Set-CsTenantFederationConfiguration AllowFederatedUsers $false.
B. From PowerShell, run Set-CsPrivacyConfiguration -EnablePrivacyMode $true.
C. From the Microsoft Teams admin center, add the external partners to the Allow only specific external domains list.
D. From External collaboration settings in the Azure Active Directory admin center, configure Guest user access restrictions.

Answer: B
Explanation:
-EnablePrivacyMode
If True, gives users the opportunity to enable the advanced privacy mode. In advanced privacy mode, only people on your Contacts list will be allowed to view your presence information. If False, your presence information will be available to anyone in your organization. The default value is False.
https://learn.microsoft.com/en-us/powershell/module/skype/Set-CsPrivacyConfiguration?redirectedfrom=MSDN&view=skype-ps#-enableprivacymode

QUESTION 325
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You purchase three new Microsoft Teams display devices.
You need to provision the new devices remotely.
What information should you use to identify each device, and which file format should you use for the upload? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Complete the following steps to provision a new device.
Sign in to the Teams admin center.
Expand Teams Devices.
Select Provision new device from the Actions tab.
In the Provision new devices window, you can either add the MAC address manually or upload a CSV file.
https://learn.microsoft.com/en-us/microsoftteams/devices/remote-provision-remote-login#add-a-device-mac-address

QUESTION 326
Hotspot Question
You have a Microsoft 365 subscription that uses Teams.
You plan to create a Teams policy that will provide users with the ability to participate in surveys by Microsoft.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/powershell/module/skype/new-csteamsfeedbackpolicy?view=skype-ps

QUESTION 327
Hotspot Question
You have a Microsoft 365 subscription that uses Teams.
You have two teams named Department1 and Department2.
You need to implement a security and compliance solution that meets the following requirements:
– Prevents the members of Department1 and Department2 from communicating with each other in Teams.
– Provides an alert if offensive language is used during a Teams chat.
Which Microsoft Purview feature should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
https://learn.microsoft.com/en-us/microsoft-365/compliance/communication-compliance?view=o365-worldwide

QUESTION 328
Your company uses Teams.
Users often use Teams mobile apps to make and receive calls.
You change the display name for a user named User1.
User1 reports that their previous name still appears when they receive incoming calls in the Teams mobile app.
You need to ensure that the updated display name for User1 appears.
What should you do?

A. Collect and review the Debug logs.
B. Run the Sync-CsOnlineApplicationInstance cmdlet.
C. From the Microsoft 365 admin center, run self-help diagnostics.
D. Clear the Microsoft Teams client cache on the mobile phone.

Answer: D

QUESTION 329
Hotspot Question
Your company has offices in New York and Seattle.
You have a Microsoft 365 subscription that uses Teams.
You plan to assess network connectivity and make recommendations to optimize connectivity from each office to Teams.
You run the Microsoft 365 network connectivity test tool at both offices and produce the results shown in the following table.

For each of the following statements, select Yes if True. Otherwise select No.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 330
Hotspot Question
You have a Microsoft 365 subscription that uses Teams. The subscription contains the users shown in the following table.

User3 owns a public team named Sales that contains two channels named Planning and Budgets.
You have the following custom blocked words list.
Project, Contoso, Group, Team
For each of the following statements, select Yes if True. Otherwise select No.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 331
You have a Microsoft 365 E5 subscription that uses Microsoft Teams.
You create a team named SalesProject.
You need users to be added automatically to the team based on their department attribute.
What should you do?

A. From the Azure Active Directory admin center, change the Membership type setting of SalesProject.
B. From the Azure Active Directory admin center, change the Group type setting of SalesProject.
C. From the Microsoft 365 admin center, modify the settings of SalesProject.
D. From the Microsoft Teams admin center, modify the settings of SalesProject.

Answer: A
Explanation:
Membership type needs to be changed from Assigned to Dynamic user. This can be achieved in Azure Active Directory admin center by going to Groups and than select the group that you want to change the membership type.

QUESTION 332
Hotspot Question
You have a Microsoft 365 E5 subscription that uses Microsoft Teams and contains three users named User1, User2, and User3.
The Teams upgrade settings for the organization are configured as shown in the following exhibit.

The Coexistence mode settings for the users are configured as shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: No
User1 coexistence mode is set to Org-wide settings, which is set to Skype for Business.
In this coexistence mode, users remain in Skype for Businessג€”not Teamsג€”for chat, meeting, and calling capabilities, and they don’t use Teams for teams and channels.
Box 2: Yes
User2 coexistence mode is set to Skype for Business with Teams collaboration.
Use this mode to introduce Teams in your environment while you continue to use your existing investment in Skype for Business.
The “Download the Teams app in the background..” is on.
You can select the “Download the Teams app in the background for Skype for Business users” option. By default, this setting is set to On. With this setting enabled it will download the Teams app in the background for users running the Skype for Business app on Windows PCs. This happens if the Coexistence mode for the user is Teams Only, or if a pending upgrade notification is enabled in the Skype for Business app.
Box 3: No
User3 coexistence mode is set to Teams only.
A Teams Only user (also called an upgraded user) has access to all the capabilities in Teams. They may retain the Skype for Business client to join meetings on Skype for Business that have been organized by non-upgraded users or external parties. An upgraded user can continue to communicate with other users in the organization who are still using Skype for Business by using the interoperability capabilities between Teams and Skype for Business (provided the Skype for Business users are not in Islands mode).
Reference:
https://docs.microsoft.com/en-us/microsoftteams/teams-and-skypeforbusiness-coexistence-and-interoperability

QUESTION 333
You have a Microsoft 365 subscription that uses Microsoft Teams and contains a distribution group named Group1 and a team named Project1.
You add Group1 to Project1.
100 new members are added to Group1.
When will the membership of Project1 will be updated to reflect the changes to the group membership?

A. Automatically and immediately
B. Automatically after 24 hours
C. Only when the group is re-added manually to Project1

Answer: B
Explanation:
If you add or remove team members outside of the Teams client (by using the Microsoft 365 admin center, Azure AD, or Exchange Online PowerShell), it can take up to 24 hours for changes to be reflected in Teams.
Note: Dynamic distribution groups (DDGs) are mail-enabled Active Directory group objects that are created to expedite the mass sending of email messages and other information within a Microsoft Exchange organization.
The membership list is now stored for each DDG and is updated once every 24 hours.
Reference:
https://docs.microsoft.com/en-us/microsoftteams/office-365-groups

QUESTION 334
You have a Microsoft 365 subscription that uses Microsoft Teams.
The subscription is configured to display de-identified names in all reports.
You need to publish reports on the usage of teams in the subscription. The solution must include only reports that support de-identified names.
Which two reports can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Teams live event usage
B. Teams user activity
C. PSTN blocked users
D. Teams usage
E. Teams device usage

Answer: BD
Explanation:
Enabling this setting will de-identify user, group, and site name information in the Teams user activity report, Teams device usage report, and Teams usage report. Starting September 1, 2021, this setting is enabled by default for everyone as part of our ongoing commitment to help protect important information and enable companies to support their local privacy laws.
Reference: https://learn.microsoft.com/en-us/microsoftteams/teams-analytics-and-reports/teams-reporting-reference

QUESTION 335
You have a Microsoft 365 E5 subscription that uses Microsoft Teams.
You need to identify which percentage of meetings include video.
What should you use?

A. the Teams device usage report
B. Productivity Score Meetings insights
C. the Teams usage report
D. the Teams user activity report

Answer: B
Explanation:
https://learn.microsoft.com/en-us/microsoft-365/admin/adoption/meetings?view=o365-worldwide

QUESTION 336
You have a Microsoft 365 subscription that uses Microsoft Teams and contains a user named User1. User1 has a Windows 10 device that has the Teams desktop client installed.
The Teams desktop client has the notification settings shown in the following exhibit.

User1 reports that he does NOT receive alerts for Teams activities on his device.
What should you do to ensure that User1 receives Teams alerts?

A. From the Settings app, modify the Focus assist settings.
B. From the Microsoft Teams client change Teams and channels notifications to All activity.
C. From the Settings app, modify the Notifications & actions settings.
D. From the Microsoft Teams admin center, modify the Messaging policies settings.

Answer: C
Explanation:
https://support.microsoft.com/en-us/office/change-your-notifications-style-in-teams-0da93820-93d0-4da3-86b6-fc28d19908e3

QUESTION 337
You have a Microsoft 365 subscription that uses Microsoft Teams.
Users report that when they attempt to add a third-party app named App1 to the Microsoft Teams client they receive the following message: “App1 needs permission to access resources in your organization that only an admin can grant. Please ask an admin to grant permission to this app before you can use it”.
You need to ensure that the users can add App1 without receiving the message.
What should you do in the Microsoft Teams admin center?

A. Create a new app permission policy.
B. Modify the Org-wide app settings.
C. Modify the Org-wide permissions for App1.
D. Create a new app setup policy.

Answer: C
Explanation:
TAC – Manage Apps – Select the App – Permissions
Review and accept permissions for company
https://learn.microsoft.com/en-us/microsoftteams/app-permissions-admin-center

QUESTION 338
You have a Microsoft Office 365 subscription.
You need to prevent guest users from deleting channels from a Microsoft Teams team.
What should you use?

A. the Microsoft Teams admin center
B. the Microsoft 365 admin center
C. the Microsoft Teams client
D. the Azure Active Directory admin center

Answer: A
Explanation:
Disable the Allow guests to delete channels option in the Teams client. Go to the team name and select More options > Manage team. Then select Settings > Guest permissions.
Note:
There are several versions of this question in the exam. The question has two possible correct answers:
1. the Microsoft Teams client
2. the Microsoft Teams PowerShell module
Other incorrect answer options you may see on the exam include the following:
– the Microsoft 365 admin center
– the Azure Active Directory for Windows PowerShell
Reference:
https://support.microsoft.com/en-us/office/set-guest-permissions-for-channels-in-teams-4756c468-2746-4bfd-a582-736d55fcc169

QUESTION 339
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 8
You need to enable shared channel collaboration with microsoft.com. The solution must meet the following requirements:
– Users must be able to participate in shared channels created by microsoft.com.
– Users must be able to invite Microsoft contacts to shared channels created by users at your company.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 340
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g. copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please not that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Username and password.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: XXXXXXXXXXXX
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 26178313
Task 9
You need to deploy the Microsoft Viva Connections app to Teams and install the app as the first item on the app bar of the Teams client for all users.
To complete this task, sign in to the Microsoft 365 portal.
Answer:

QUESTION 341
You have a team in Microsoft Teams named Team1 that has the channels shown in the following table.

Which channels support moderation?

A. Channel1 only
B. Channel1 and Channel2 only
C. General only
D. Channel2 only
E. General and Channel1 only

Answer: E

QUESTION 342
Your company uses Teams Calling Plans.
When a user places a Teams call to an ambulance service, you need to ensure that a notification is also sent to the main receptionist of the company.
What should you configure?

A. a caller ID policy
B. a calling policy
C. a voice routing policy
D. an emergency calling policy

Answer: D
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/what-are-emergency-locations-addresses-and-call-routing
You use a Teams emergency calling policy (TeamsEmergencyCallingPolicy) to configure who should be notified during an emergency call and how they are notified: chat only, conferenced in and muted, or conferenced in and muted but with the ability to unmute. You can also specify an external PSTN number of a user or group to call and join the emergency call. Note that the PSTN party is not allowed to unmute.

QUESTION 343
You have a Microsoft 365 E5 subscription that uses Microsoft Teams and contains the resources shown in the following table.

You need to configure the subscription to meet the following requirements:
– App1 must be pinned only to the Teams desktop client of the users in Group1.
– App2 must be pinned only to the Teams desktop client of the users in Group2.
What should you do in the Microsoft Teams admin center?

A. Create app setup policies.
B. Create app permission policies.
C. Modify the global (Org-wide default) app permission policy.
D. Modify the global (Org-wide default) app setup policy.

Answer: A

QUESTION 344
You have a Microsoft 365 subscription.
In Microsoft Teams, you create a new private team named Team1 and add a user named User1 as a member.
User1 attempts to add members to Team1 and reports that approval is required.
You need to ensure that User1 can add members to Team 1 without requiring approval.
What should you do?

A. Configure a new Microsoft Teams policy.
B. Configure guest access.
C. Configure User1 as an owner of Team1.
D. Assign the Teams Communications Support Specialist role to User1.

Answer: C

QUESTION 345
Your company uses Microsoft Teams.
You have a team named Team1 that has the channels shown in the following table.

You plan to enable channel moderation for the channels.
Which channels support channel moderation?

A. General and Channel1 only
B. Channel2 only
C. Channel1 only
D. Channel1 and Channel2 only
E. General, Channel1, and Channel2
F. General only

Answer: C
Explanation:
Channel moderation is available for standard channels on Teams for desktop or web. It’s not available for the general channel or private channels.
https://support.microsoft.com/en-us/office/change-moderator-roles-and-settings-in-a-channel-6ac54758-3440-4f6a-9bd5-cebf97cb7ea6

QUESTION 346
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains several Microsoft SharePoint Online sites.
You need to ensure that the content stored in a SharePoint modern team site named Sales is available from Microsoft Teams. The solution must ensure that when a new channel is added to a team, a folder for the channel is created in the Sales site.
Solution: From the Microsoft Teams client, you create a new team and select From a group or team.
Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation:
When you create a new team from an existing Microsoft 365 group, the team is connected to the SharePoint site associated with the group.
https://learn.microsoft.com/en-us/SharePoint/teams-connected-sites

QUESTION 347
Your company is releasing a Request for Proposal (RFP) and is collaborating with four vendors. Each vendor must communicate with the company, but the vendors must NOT be able to communicate with each other in channel posts.
The company must communicate internally about vendor specifics without the vendors having access to these communications.
You need to create teams and channels in Microsoft Teams to support the communication requirements. The solution must minimize the number of teams.
What should you do?

A. Create one team that has one private channel per vendor. Use the General channel for internal communications.
B. Create two teams per vendor. Use one team per vendor for internal communications.
C. Create one team per vendor. Use a private channel for internal communications.
D. Create one team that has two private channels per vendor. Use one of the private channels per vendor for internal communications.

Answer: C

QUESTION 348
You have a Microsoft Office 365 subscription.
You need to prevent guest users from deleting channels from a Microsoft Teams team.
What should you use?

A. the Azure portal
B. the Microsoft Purview compliance portal
C. the Microsoft Teams PowerShell module
D. the Azure Active Directory Module for Windows PowerShell

Answer: C
Explanation:
Disable the Allow guests to delete channels option in the Teams client. Go to the team name and select More options > Manage team. Then select Settings > Guest permissions.
Note:
There are several versions of this question in the exam. The question has two possible correct answers:
1. the Microsoft Teams client
2. the Microsoft Teams PowerShell module
Other incorrect answer options you may see on the exam include the following:
– the Microsoft 365 admin center
– the Azure Active Directory for Windows PowerShell
Reference:
https://support.microsoft.com/en-us/office/set-guest-permissions-for-channels-in-teams-4756c468-2746-4bfd-a582-736d55fcc169

QUESTION 349
You have a Microsoft Office 365 subscription.
You need to prevent guest users from deleting channels from a Microsoft Teams team.
What should you use?

A. the Microsoft Teams client
B. the Azure Active Directory Module for Windows PowerShell
C. the Azure Active Directory admin center
D. the Azure portal

Answer: A
Explanation:
Disable the Allow guests to delete channels option in the Teams client. Go to the team name and select More options > Manage team. Then select Settings > Guest permissions.
Note:
There are several versions of this question in the exam. The question has two possible correct answers:
1. the Microsoft Teams client
2. the Microsoft Teams PowerShell module
Other incorrect answer options you may see on the exam include the following:
– the Microsoft 365 admin center
– the Azure Active Directory for Windows PowerShell
Reference:
https://support.microsoft.com/en-us/office/set-guest-permissions-for-channels-in-teams-4756c468-2746-4bfd-a582-736d55fcc169

QUESTION 350
Your company uses Teams.
You are assigned the Teams Communications Support Specialist role.
You need to be assigned a role that will enable you to publish a new app to the Teams apps page. The solution must follow the principle of least privilege.
Which role should be assigned to you?

A. Teams Administrator
B. Cloud Application Administrator
C. Application Administrator
D. Office Apps Administrator

Answer: A
Explanation:
Even though there is a Cloud Application Administrator role in Azure Active Directory (now called Entra), that role cannot access the Teams Admin Center with priviledges to make changes.
https://learn.microsoft.com/en-us/microsoftteams/using-admin-roles

QUESTION 351
Hotspot Question
You need to install the Microsoft Viva Connections application in Microsoft Teams for a specific group.
How should you complete the PowerShell cmdlets? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: New-CsGroupPolicyAssignment
Use the New-CsGroupPolicyAssignment cmdlet to assign a policy to a group.
Example: New-CsGroupPolicyAssignment -GroupId d8ebfa45-0f28-4d2d-9bcc-b158a49e2d17 -PolicyType TeamsMeetingPolicy -PolicyName “Retail Managers
Meeting Policy” -Rank 1
Box 2: TeamsAppsSetupPolicy
Use app setup policies to install and pin apps to promote the most used apps in your organization, and to decide if you want users to upload custom apps to
Teams.
* Install apps: App setup policies let you install apps on behalf of users when they start Teams and during meetings.
* Pin apps.
* Upload custom apps.
Reference:
https://docs.microsoft.com/en-us/microsoftteams/assign-policies-users-and-groups
https://docs.microsoft.com/en-us/microsoftteams/teams-app-setup-policies

QUESTION 352
Hotspot Question
You have a Microsoft 365 subscription that uses Microsoft Teams.
You have a team named Project1 that contains the members shown in the following table.

Project1 contains the channels shown in the following table.

You need to identify which users can be added as a channel moderator, and which channels support moderation.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

QUESTION 353
Hotspot Question
You have a Microsoft 365 subscription that uses Teams and contains the users shown in the following table.

You have the messaging policies shown in the following table.

The messaging policies are assigned as shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
User1 can delete sent messages: No, owners cannot delete sent chats in the Org-Wide policy.
User2 can delete sent messages: No, members cannot delete sent chats in Finance policy.
User3 cannot edit sent messages: Yes, members cannot edit sent chats in Procurement policy.

QUESTION 354
Hotspot Question
You have a Teams deployment that contains the following teams:
– Marketing
– Sales
You plan to create new channels to meet the following requirements:
– The Sales team must collaborate on customer reviews.
– The Marketing team must collaborate with the Sales team on a product rollout.
You need to recommend which types of channels to use for the teams.
What should you recommend for each team? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
It was never specified that only a small number of people inside the Sales team can see the Customer Reviews. it was implied that everyone inside the Sales team can look at customer reviews. hence it should be standard channel

QUESTION 355
Hotspot Question
You have a Microsoft 365 subscription that uses Teams.
You have a template to create a team named Team1.
You need to modify the template so that only Team1 owners can delete channels and messages.
How should you complete the template? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

---

Resources From:

1.2023 Latest Braindump2go MS-700 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/ms-700.html

2.2023 Latest Braindump2go MS-700 PDF and MS-700 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1DMiEECW2nM908PFth7CuqrIRsQ3y83nC?usp=sharing

3.2023 Free Braindump2go MS-700 Exam Questions Download:
https://www.braindump2go.com/free-online-pdf/MS-700-PDF-Dumps(285-357).pdf

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!